High Temperature Valves Suppliers – High Pressure Valve China | ZECO Valvewedge gate valve

Gases like nitrogen, argon, and hydrogen present unique challenges that demand special gas-handling components. For more than 60 years ZECO has produced standard and custom valves and fittings specifically designed for cryogenic and extreme heat environments. Whether it’s for a compressed gas fill plant, a cryogenic test bench, or any other gas handling application involving extreme temperatures and pressures, count on proven valves to move your gas.

• Manual and air-operated valves for pressures from 10,000 to 30,000 psi
• Extended stuffing box designs move packing away from cold or hot zones for safe and reliable operation
• Special materials such as Monel and Hastelloy are available
• Coned-and-threaded connections provide extra dependability

High Pressure Valve China

High Pressure Metal Ball Valve – Manufacturers, Suppliers, Factory From China

In an effort to finest meet up with client’s requirements, all of our operations are strictly performed in line with our motto “High High quality, Competitive Rate, Fast Service” for High-Pressure Metal Ball Valve, Pneumatic Casting Steel Globe Valve, Pneumatic Forged Steel Globe Valve, Floating Ball Valve, A Gate Valve. We have now deep cooperation with hundreds of factories all over China. The goods we give can match your different calls. Choose us, and we won’t make you regret it! The product will supply to all over the world, such as in Europe, America, Australia, Czech, Armenia, Panama, Netherlands. We will initiate the second phase of our development strategy. Our company regards “reasonable prices, efficient production time and good after-sales service” as our tenet. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

High Pressure Butterfly Valve

High pressure butterfly valve means the pressure is higher than the PN25 or Class 150Lb butterfly valve. We design and manufacture this kind of valve pressure up to ANSI Class 900# (15.0MPa) maximum. So for a lot of projects, it is a reasonable choice instead of a ball valve and gate valve with much cheaper cost and high performance.

This high pressure butterfly is widely used in foodstuff, beverage, pharmaceutics, boiler, oil refining, chemical machinery industries, chemical, and petrochemical processing, power generating plants, pulp, and paper manufacturing processing, desalination, steelmaking, coal and mining industries

Under normal circumstances, industrial valves are not subjected to strength tests when in use, but the body and bonnet or the valve body and bonnet damaged by corrosion should be tested for strength after repair. For safety valves, the set pressure and return pressure and other tests shall comply with the specifications and relevant regulations. The strength and tightness test of the valve installation should be done. 20% of low-pressure valves should be checked randomly. If they are unqualified, 100% should be checked; medium and high-pressure valves should be 100% checked. Commonly used media for valve pressure testing include water, oil, air, steam, nitrogen, etc. The pressure testing methods for various industrial valves including pneumatic valves are as follows:

1. Pressure Test Method of the Ball Valve 　

The strength test of the pneumatic ball valve should be carried out with the ball half open.

• Floating ball valve tightness test: put the valve in a half-open state, introduce the test medium at one end, and close the other end; rotate the ball several times, open the closed end when the valve is in the closed state, and check the sealing performance at the packing and gasket at the same time. There must be no leakage. Then introduce the test medium from the other end and repeat the above test.
• Trunnion ball valve tightness test: before the test, rotate the sphere without load several times, the fixed ball valve is in the closed state, and the test medium is introduced from one end to the specified value; the pressure gauge is used to check the sealing performance of the inlet end, and the accuracy of the pressure gauge is Level 5 to 1, the range is 1.5 times the test pressure. Within the specified time, there is no decompression phenomenon as qualified; then introduce the test medium from the other end, and repeat the above test. Then, put the valve in a half-open state, with both ends closed, and the inner cavity filled with medium, check the packing and gasket under the test pressure, and there should be no leakage.
• The three-way ball valve should be tested for tightness at various positions.　

2. Pressure Test Method of Check Valve

Check valve test state: The lift check valve disc axis is in a position perpendicular to the horizontal; the swing check valve channel axis and disc axis are in a position approximately parallel to the horizontal line. In the strength test, the test medium is introduced from the inlet end to the specified value, and the other end is closed. It is qualified if there is no leakage in the valve body and bonnet. In the sealing test, the test medium is introduced from the outlet end, and the sealing surface is checked at the inlet end. No leakage at the packing and gasket is qualified.　　

3. Pressure Test Method of Pressure Reducing valve

• The strength test of pressure reducing valve is generally assembled after a single-piece test, and it can also be tested after assembly. The duration of the strength test: 1 min for DN150mm. After the bellows and the components are welded, apply 1.5 times the highest pressure after the pressure-reducing valve, and conduct a strength test with air.
• The sealing test shall be carried out according to the actual working medium. When testing with air or water, perform the test at 1.1 times the nominal pressure; when testing with steam, perform the test at the highest working pressure allowed under the working temperature. The difference between the inlet pressure and the outlet pressure must not be less than 0.2MPa. The test method is: after the inlet pressure is adjusted, gradually adjust the adjusting screw of the valve so that the outlet pressure can change sensitively and continuously within the range of the maximum and minimum values, without stagnation or jamming. For the steam pressure-reducing valve, when the inlet pressure is adjusted, the valve is shut off after the valve is closed, and the outlet pressure is the highest and lowest value. Within 2 minutes, the rise in the outlet pressure should meet the requirements in Table 4.176-22. At the same time, the pipeline behind the valve The volume meets the requirements in Table 4.18 as qualified; for water and air pressure-reducing valves, when the inlet pressure is adjusted and the outlet pressure is zero, the pressure reducing valve is closed and the tightness test is performed. No leakage within 2 minutes is qualified.

4. Pressure test method of the Butterfly Valve

The strength test of the pneumatic butterfly valve is the same as that of the stop valve. The sealing performance test of the butterfly valve should introduce the test medium from the end of the medium flow, the butterfly plate should be opened, the other end should be closed, and the injection pressure should reach the specified value; after checking the packing and other seals without leakage, close the butterfly plate, open the other end, and check the butterfly No leakage at the plate seal is qualified. The butterfly valve used to adjust the flow can not be tested for sealing performance.

5. Pressure Test Method of Plug Valve

• When the plug valve is subjected to a strength test, the medium is introduced from one end, the remaining passages are closed, and the plug is rotated to the fully open working positions for the test. The valve body is qualified without any leakage.
• During the sealing test, the straight-through plug should keep the pressure in the cavity equal to that of the passage, rotate the plug to the closed position, check from the other end, and then rotate the plug 180° to repeat the above test; three-way or four-way plug valve The pressure in the cavity and one end of the passage should be kept equal, the stopper should be rotated to the closed position, in turn, the pressure should be introduced from the right-angle end, and the other end should be inspected simultaneously.
• Before the plug valve test, it is allowed to apply a layer of non-acidic dilute lubricating oil on the sealing surface, and no leakage or enlarged water droplets within the specified time are qualified. The test time of the plug valve can be shorter, generally 1~3min according to the nominal diameter.
• The plug valve for gas shall be tested for air tightness at 1.25 times the working pressure.

6. Pressure Test Method of Diaphragm Valve

In the diaphragm valve strength test, the medium is introduced from either end, the valve flap is opened, and the other end is closed. After the test pressure rises to the specified value, it is qualified to see if the valve body and bonnet have no leakage. Then reduce the pressure to the tightness test pressure, close the valve flap, and open the other end for inspection. No leakage is considered qualified.

7. Pressure Test Method of the Stop Valve and the Throttle Valve

For the strength test of the stop valve and the throttle valve, usually put the assembled valve in the pressure test rack, open the disc, inject the medium to the specified value, and check the valve body and valve Whether the cover is sweating and leaking. The strength test can also be performed on a single piece. Only stop valves are used for the sealing tests. During the test, the valve stem of the shut-off valve is in a vertical state, the valve flap is opened, and the medium is introduced from the bottom end of the valve flap to the specified value. Check the packing and gasket; close the valve flap after passing the test, and open the other end to check for leakage. If both the valve strength and tightness tests are to be done, the strength test can be done first, then the pressure is reduced to the specified value of the tightness test, and the packing and gaskets are checked; then the valve flap is closed and the outlet end is opened to check whether the sealing surface is leaking.

8. Pressure Test Method of Gate Valve

The strength test of a gate valve is the same as that of the globe valve. There are two methods for the sealing test of the gate valve.

• Open the gate to increase the pressure in the valve to the specified value; then close the gate and immediately take out the gate valve to check whether there is any leakage at the seals on both sides of the gate or directly inject the test medium into the plug on the valve cover to the specified value, Check the seals on both sides of the gate. The above method is called the intermediate pressure test. This method is not suitable for sealing tests on gate valves with a nominal diameter below DN32mm.
• Another method is to open the gate to increase the test pressure of the valve to the specified value; then close the gate and open the blind plate at one end to check whether the sealing surface is leaking. It fell further, to make the above test repeated engagement until the grid.
• Pneumatic gate valve packing and gasket sealing tests should be carried out before the gate sealing test.

9. Pressure Test Method of Safety Valve

• The strength test of the safety valve is the same as that of other valves. It is tested with water. When testing the lower part of the valve body, the pressure is introduced from the inlet I=I end and the sealing surface is closed; when testing the upper part of the valve body and the bonnet, the pressure is introduced from the outlet El end and the other ends are closed. No leakage of the valve body and bonnet within the specified time is qualified.
• For the sealing test and constant pressure test, the general use medium is: steam safety valve uses saturated steam as the test medium; ammonia or other gas valves use air as the test medium; water and other non-corrosive liquid valves use water as the test medium. For safety valves in some important positions, nitrogen is often used as the test medium.
• The sealing test shall be conducted with the nominal pressure value as the test pressure, the number of times shall not be less than twice, and no leakage within the specified time shall be qualified. There are two leak detection methods: one is to seal the joints of the safety valve and use butter to seal the thin paper on the flange of the outlet. The plastic plate or other plate seal is attached to the lower part of the outlet flange, and the valve disc is sealed with water. It is qualified if the water does not bubble. The safety valve’s constant pressure and return pressure test times are not less than 3 times, and it is qualified as conforming to the regulations. The various performance tests of safety valves refer to GB/T 12242-1989 Safety Valve Performance Test Methods.

Valve Pressure Test Regulations

• After unpacking all valves should be visually inspected, comprising a plate on the valve body is complete, the product quality documents, the valve is closed, the other can not damage the like blue surface, no Dirty, both ends of the anti-protection Cover, etc.
• The operator should be familiar with the operation of the pressure test bench.
• The valve pressure test JHA is perfect, and the operator should be familiar with the safety hazards of the valve pressure test and reverse transportation and take corresponding preventive measures.
• The valve pressure test process is the valve shell strength test, upper seal test, and seal test.
  • The test medium for the strength of the valve shell is water, the pressure is 1.5 times the nominal pressure of the valve, the pressure holding time is 5 minutes, and no drip or moisture is qualified.
  • The sealing test medium on the valve adopts water, the pressure is 1.5 times the nominal pressure, the holding time is 15s for DN≤50, the 60s for 65≤DN≤300, and the 120s for DN≥350. No leakage is qualified.
  • Valve sealing test: Low-pressure sealing test is carried out. The test medium is air (gate valve), the pressure is 0.6MPa, the pressure holding time is 15s for DN≤50, the 60s for 65≤DN≤150, and the 120s for DN≧200. The requirement is qualified.
  • After the pressure test is qualified, the water in the valve cavity should be blown dry with compressed air in time.
  • Valves that pass the pressure test are marked √ on the valve body, and valves that are unqualified are marked ×.
  • After the pressure test, the valves should be stacked separately according to the type and specifications of the device, and the unqualified products should be stacked separately; each stacking area should be erected with a clear sign. After the pressure test, the valve should be closed and sealed, and covered and protected with colored cloth in the stacking area.
  • After the valve pressure test, the “Valve/Pipe Fitting Test Record” should be filled in time according to the device, and the model column should be filled in with the purchase contract number on the valve body.
  • For valves that have passed the test, the valve “Valve Issuance Record” must be filled in and signed by both the issuing and receiving parties.
  • Unqualified valves need to establish a separate “Unqualified Valve Information Ledger”

Related Tags :

　

Ten articles before and after

Pressure seal gate valve, BW 900LB gate valve, China pressure seal gate valve suppliers – Titanium ball valves supplier china,Cryogenic Globe Valve manufacturers china,C95800 butterfly valve in china,Bellow sealed globe valve factory,inconel 625 globe valve company | Professional valve manufacturer

stainess steel butterfly valve,triple offset butterfly valve – Titanium ball valves supplier china,Cryogenic Globe Valve manufacturers china,C95800 butterfly valve in china,Bellow sealed globe valve factory,inconel 625 globe valve company | Professional valve manufacturer

High pressure valve, WCC gate lvave – Titanium ball valves supplier china,Cryogenic Globe Valve manufacturers china,C95800 butterfly valve in china,Bellow sealed globe valve factory,inconel 625 globe valve company | Professional valve manufacturer

Butterfly Valve And Gate Valve In Different Conditions Of Application | API 6D ball valve manufacturer

Know About Rotary Control Valves | API 6D ball valve manufacturer

Zirconium dual plate wafer check valve, ASTM B752 Gr. 702C dual plate wafer check valve – Titanium ball valves supplier china,Cryogenic Globe Valve manufacturers china,C95800 butterfly valve in china,Bellow sealed globe valve factory,inconel 625 globe valve company | Professional valve manufacturer

Level operated 4” butterfly valve,ductile iron wafer butterfly valve,Viton lined butterfly valve,viton lined butterfly valve made in China – Titanium ball valves supplier china,Cryogenic Globe Valve manufacturers china,C95800 butterfly valve in china,Bellow sealed globe valve factory,inconel 625 globe valve company | Professional valve manufacturer

high pressure control valve,2500LB control valve – Titanium ball valves supplier china,Cryogenic Globe Valve manufacturers china,C95800 butterfly valve in china,Bellow sealed globe valve factory,inconel 625 globe valve company | Professional valve manufacturer

bronze ball valve, ball valve C95800 – Titanium ball valves supplier china,Cryogenic Globe Valve manufacturers china,C95800 butterfly valve in china,Bellow sealed globe valve factory,inconel 625 globe valve company | Professional valve manufacturer

A182 F304 lift check valve, high quality piston check valve – Titanium ball valves supplier china,Cryogenic Globe Valve manufacturers china,C95800 butterfly valve in china,Bellow sealed globe valve factory,inconel 625 globe valve company | Professional valve manufacturer