3 three way ball valve
3 way ss ball valve
pvc 3 way ball valve
3/4 ball valves
The Japanese Industrial Standards Committee (JISC), Japan’s national standardization body, plays a central role in developing standards in Japan covering a wide range of products and technologies from robots to pictograms. JISC is also responsible for Japan’s growing contribution to setting international standards through its work with the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC).
“JIS” Stands for Japanese Industrial Standard and is published by the Japanese Standards Association (JSA) which is the equivalent of ANSI in the United States. They are created and updated by the Committee of the Japanese Industrial Standards (JISC). Like JSA to ANSI, the JISC is similar to the American Society of Mechanical Engineers (ASME).
Table of Contents
- 1. Introduction of JIS Standard Flange
- 2. Main Features of JIS Standard Flange
- 3. Applications of JIS Standard Flange
- 4. Slip On Flat Face Flange:
- 5. Differences between a Flat Face and Raised Face Flanges:
- Flat Face Flanges
- Blind Flanges
- 6. Installation of Flanges:
- Japan Standard Flange Dimensions, JIS 2K/5K/10K/16K/20K/30K/40K/63K
- JIS Flanges 16K (kg/cm2) Dimension Chart
- JIS Flanges 20K (kg/cm2) Dimension Chart
- JIS Flanges 30K (kg/cm2) Dimension Chart
- JIS Flanges 40K (kg/cm2) Dimension Chart
- JIS Flanges 63K (kg/cm2) Dimension Chart
- JIS Flanges 2K (kg/cm2) Dimension Chart
- JIS Flanges 5K (kg/cm2) Dimension Chart
- JIS Flanges 10K (kg/cm2) Dimension Chart
- What are API standard flange?
1. Introduction of JIS Standard Flange
A flange is a general term used for items that connect pipes, valves, pumps, and other equipment to form a piping system. One of the best parts of using a flange is that they give very easy access for cleaning, inspection, or modification of the system. A JIS10K Flange is a slip on flange. This is different from other types of flanges, such as a welding neck flange or a lap joint flange. The JIS10K Flange is a slip on flange that follows the standard made by JIS, the Japanese Industrial Standard. Specifically, the JIS10K Flange that is used is made to the JIS B2220 standard. The word 10K comes from the fact that the JIS10K Flange has been made to fulfill the rigors of 10kg/cm² of pressure. This is all by the JIS B2220 standard created by the Japanese Industrial Standard.
2. Main Features of JIS Standard Flange
The JIS 10K Flange comes in multiple different sizes. This means that it is perfect for usage in many different situations, from small systems up to very large ones. The size range that is offered ranges from 3/8 inches up to 8 inches. The JIS10K Flanges were made up to code with the JIS B2220 design standards, and can work in pressures up to the standards set by JIS. These flanges are made in China. Furthermore, the materials used to make up the flanges are top notch which ensures the flange’s longevity and strength.
The steel that was used to make these flanges were SS400 steel and stainless steel, grade 316. The SS400 steel is a hot rolled steel composed of Carbon, Silicon, Sulphur (0.050 percent max), Phosphorus (0.050 percent max), Iron, and Manganese. Meanwhile, Stainless Steel SS316 is composed of Carbon (0.08 percent maxi), Phosphorus (0.045 percent max), Sulphur (0.030 percent max), Silicon (0.75 percent max), Chromium (16.00 percent max), Nitrogen (10.00 percent), Manganese (2.00 percent max), and Molybdenum (2.00 percent).
3. Applications of JIS Standard Flange
Flanges are mostly used for connecting pipes or to attach a pipe to another component. Blind flange is used in order to close the end of a pipe, so that the flow will stop at the point of blind flange installation. As installation only requires screwing two flanges together and the pipes that are connected using flanges can be disassembled easily as well. Most commonly found in plumbing or piping, flanges are used in things such as a sink in the house, in the piping system for showers and also for toilets as well. In the manufacturing industry, flanges are also commonly used in piping systems that have considerable amounts of pressure.
4. Slip On Flat Face Flange:
Slip-On flanges are the most popular pipe flanges used for pipe-to-borehole insertion. The slip on flange is a convenient option to weld on the neck. It can alter the length of the corresponding pipe. This space allows individuals working on the flange access to connect easily.
This flange design is more common in lower pressure assemblies and is less utilized when a high stress service requires a superior connection to the piping line assembly. This is because a slip on flange will accept a pipe with a fillet weld connection. On the other hand, a weld neck flange has a reinforced hub at the case that produces a weld beveled end connected directly to the butt weld pipe end connection. The tapered hub provides better service in mechanical stress environments. When compared to the cost of a standard flange, slip on flanges have a cheaper material cost.
5. Differences between a Flat Face and Raised Face Flanges:
The major difference between flat face and raised face flanges are the raised area that surrounds the pipe bore, whereas the flat face flange does not. A flat face flange cannot be connected with a raised face flange as it would result in leaking.
Flat Face Flanges
Flat face flanges have a surface area that is the same height thickness as the flange’s bolting line. The entire surface is flat, and a soft type complete face gasket is utilized to connect two flat face flanges. The gasket is usually composed of a non-metallic material like Viton or EPDM. The objective of adopting a flat face flange is to avoid the bending moment imposed on the flange when the bolts are torqued. Some flange materials are readily damaged while flat face flanges can solve this problem.
Blind Flanges
A blind flange is a circular plate with a bolt hole and a solid surface that is used to seal off a pipeline or to create the end flow. They are widely utilized in the petrochemical, public services, pipe engineering, and water works industries. The blind flange is placed between two open flanges to prevent liquid flow via a pipeline.
Blind flange is typically essential when undertaking pipeline maintenance or repairs as the flow in the pipeline must be stopped for maintenance, yet the nearest valve may be kilometers away from the repair site. As a result, installing a blind flange on a pipeline is far more cost-effective.
6. Installation of Flanges:
The general way to install flanges is to put a pipe through and close it with a pair of male and female flanges, with a gasket in the middle to prevent leakage and provide better sealing. This is called a flanged joint. There are a few disadvantages of using a flange, however. One of them is that it needs to be in a straight line, as well as a flanged pipe system needs more space than the pipe radius to work, which can limit the places where it is effective. These disadvantages, however, are heavily outweighed by the benefits. Flanges can be put into the system with advanced welding with piping, which easily saves costs and time. Putting a flange joint pipe together also means that the system itself is more flexible, and can easily be reconfigured or moved without the need to unwind a few parts. Considering the amount of pressure that the flanges must get through daily, the risk of leaking is apparent. This risk however is then minimized by the JIS10K Flange, as it has been made to follow the JIS B2220 regulations, and can easily withstand 10kg/cm² worth of pressure.
Japan Standard Flange Dimensions, JIS 2K/5K/10K/16K/20K/30K/40K/63K
BLIND FLANGE PLATE FLANGE SLIP-ON FLANGE
JIS Flanges 16K (kg/cm2) Dimension Chart
JIS Flanges 20K (kg/cm2) Dimension Chart
JIS Flanges 30K (kg/cm2) Dimension Chart
JIS Flanges 40K (kg/cm2) Dimension Chart
JIS Flanges 63K (kg/cm2) Dimension Chart
JIS Flanges 2K (kg/cm2) Dimension Chart
JIS Flanges 5K (kg/cm2) Dimension Chart
JIS Flanges 10K (kg/cm2) Dimension Chart
What are API standard flange?
Although the dimensions of ASME and API flanges may sometimes be compatible for bolting – using the same bolt circle and the same number of bolts – they do not share the same pressure rating system.
ASME rates the pressure of a class based on the material of construction and the design temperature
API specifies allowable materials and gives them a specific pressure rating
The difference between ASME/ANSI and API is the fabrication material and a higher rated API operating pressure.
ASME/ANSI flanges are commonly used in industrial process systems handling water, steam, air, and gas. API flanges are manufactured for high strength operating refinery systems with products such as oil and explosive gases.
Related Tags :
ZECO Valve
Gate Valve vs Ball Valve
NBR Butterfly Valve
What is a Globe Valve?
Gate Valve Repair
What is an Axial Check Valve
Manual Operate Gate Valve Manufacturer
What are Globe Valves?
Difference Between Gate Valve And Butterfly Valve
Ten articles before and after
Russia Preventing EU from Exporting Russian Gas to Ukraine – Zeco Valve | API approved valve manufacturer
Korea Imported Oil from The U.S. – Zeco Valve | API approved valve manufacturer
Chinese Economy Slowing Down Contains Gas Demand – Zeco Valve | API approved valve manufacturer
DIN(, JIS, ASME Standards Flange – Zeco Valve | Industrial valve manufacturer
Shipping News-customized fire fighting pump (split case pump type) is ready to ship to Egypt – Zeco Valve | Industrial valve manufacturer
Slovakia Launched a Pipe to Supply Gas to Ukraine – Zeco Valve | API approved valve manufacturer
LNG Market in China Has Overcapacity – Zeco Valve | API approved valve manufacturer
IEA: EU Has High Dependence on Russian Gas – Zeco Valve | API approved valve manufacturer
export-excellent-quality-of-pneumatic-actuators-to-sa-south-africa – Zeco Valve | Industrial valve manufacturer
Deal Between Rosneft and Vitol Fizzled Out – Zeco Valve | API approved valve manufacturer